Model: DZ-329

   Summary:                                                                    

Finished Shoes Bending Resistance Test Machine is used for bending resistance test for finished shoes.

Shoes and soles is twisted as a certain angle during a certain time, observe the shoes and sole damage,

or check the crack location and degree, so as to improve quality. The machine can set test times and stop

working at the set value. 

Sample preparation:

1. Sample must be the finished shoes made within 48 hours, no obvious defects.
2. Each group of sample should not less than 2 pairs.

Applicable standard: SATRA-TM92

 Specifications